Made this video while upgrading my saber from the first video with ultrasound 2.5. I've ordered most of the parts at JQ sabers. I've had the parts anodized local in Belgium, but JQ offers that service too. Parts : Basic push-button, Ultrasound PCB, Luxeon III LED (Amber), LED mounting peace with some thermal tape for Luxeon III LED's, 4x1,5V AA battery holder, speaker 8 Ohm, speaker holder, black and red wiring 0,2 mm, heat shrink, "kill switch" with kill plug and a heavy duelling blade. Keep in mind that the video is played between 200% to 400% speed to keep it under 10 minutes. The assembly itself took me about 4 to 5 hours. The components needed a little adjusting here and there, but it was mostly soldering and wiring the electronics. Music : Van Helsing Soundtrack - Journey to Transylvania Music composed and conducted by Alan Silvestri Ki-Djowac
Monday, November 12, 2012
Saber project ultrasound 2.5
Saber project ultrasound 2.5 Video Clips. Duration : 10.00 Mins.
Made this video while upgrading my saber from the first video with ultrasound 2.5. I've ordered most of the parts at JQ sabers. I've had the parts anodized local in Belgium, but JQ offers that service too. Parts : Basic push-button, Ultrasound PCB, Luxeon III LED (Amber), LED mounting peace with some thermal tape for Luxeon III LED's, 4x1,5V AA battery holder, speaker 8 Ohm, speaker holder, black and red wiring 0,2 mm, heat shrink, "kill switch" with kill plug and a heavy duelling blade. Keep in mind that the video is played between 200% to 400% speed to keep it under 10 minutes. The assembly itself took me about 4 to 5 hours. The components needed a little adjusting here and there, but it was mostly soldering and wiring the electronics. Music : Van Helsing Soundtrack - Journey to Transylvania Music composed and conducted by Alan Silvestri Ki-Djowac
Made this video while upgrading my saber from the first video with ultrasound 2.5. I've ordered most of the parts at JQ sabers. I've had the parts anodized local in Belgium, but JQ offers that service too. Parts : Basic push-button, Ultrasound PCB, Luxeon III LED (Amber), LED mounting peace with some thermal tape for Luxeon III LED's, 4x1,5V AA battery holder, speaker 8 Ohm, speaker holder, black and red wiring 0,2 mm, heat shrink, "kill switch" with kill plug and a heavy duelling blade. Keep in mind that the video is played between 200% to 400% speed to keep it under 10 minutes. The assembly itself took me about 4 to 5 hours. The components needed a little adjusting here and there, but it was mostly soldering and wiring the electronics. Music : Van Helsing Soundtrack - Journey to Transylvania Music composed and conducted by Alan Silvestri Ki-Djowac
Subscribe to:
Post Comments (Atom)
0 comments:
Post a Comment